Owner manual

Subli-Print Bulk Feed Installation

Make sure you have all the relevant parts with

your system.

These include:

1. 1 x Pre-filled cartridge, tube and bottle

assembly.

2. 2 x replacement cartridge lids.

3. 1 x bag containing 6 filter caps and

small tube clamp.

4. 1 x Disk containing ICC profile and

instructions.

5. 1 x Syringe

6. 5 x bottles of spare ink (40ml each)

7. 1 x Centre clamp support

Press yellow button and remove power lead as cartridge moves to the left. This

will allow the cartridge to be positioned freely by hand.

Remove original lids and any

cartridges

Fit the replacement lids supplied.

Place cartridges gently into position

but do not press down yet

Remove the rubber stoppers and

replace with the supplied filter caps