Use and Care Manual
12 13
XTREMEDRY® Pro DIY Drying Tool Kit XTREMEDRY® Pro DIY Drying Tool Kit
Step 1
Place the air scrubber near a wall - air outlet in the same direction as air
movers.
Step 2
The commercial grade HEPA air scrubber will be drawing airborne
contaminants from the surrounding area and passing it through
several lters that remove 99.97% of - 0.3 micro size particulates.
Capturing these contaminants will improve the indoor air quality for
your sta and guest.
AIR SCRUBBERS
XPOWER oers a wide selection of air movers,
dehumidiers and air scrubbers for every type of
commercial application in water and ood restoration.
Most rooms can be dried successfully back to their original condition fast
with professional results!
Hygrometer & Moisture Meter
Invest in these tools for humidity
level reading during the cycles.
It’s important to monitor and
detect the humidity level in the
room during the drying cycle
to conrm the room is drying
back to original condition. When
dry-out operations are complete, these tools can help verify that all deep
moisture have been removed before you pack up your too kit.
Start removing
moisture ASAP with
in 24 hours.
Run for 24
uninterrupted
hours
Lower the relative
humidity levels down
to 25%.
TREMEDRY
PRO
DIY
PROFESSIONAL DRYING SOLUTION
®