Use and Care Manual

8 9
XTREMEDRY® Pro DIY Drying Tool Kit XTREMEDRY® Pro DIY Drying Tool Kit
Step 1
Position air movers in the same direction.
Step 2
Position air movers snout at a 15 to 45% angle, 6 -12 inches from
the wall.
Step 3
If possible ensure that air movers are creating a cyclone eect and
not pushing air against each other.
Step 4
Any obstruction ( eg. Furniture and equipment), if their presence
prevent airow across the aected area, adjust and continue.
HOW TO SET UP:
Air Movers, Dehumidier and Air Scrubbers
AIR MOVERS
Side Placement:
Water wick into
walls/baseboard
Against Wall:
Idea for drying wet
area along wall
Flat:
Ground level carpet
and ooring
Upright:
Idea for damp ceiling