Use and Care Guide

English - 15
Troubleshooting Guide
User Maintenance Instructions
(Continued)
Store the machine
• Store the appliance in a dry and cool indoor place, away from direct sunlight as well as
chemicals and out of reach of children.
• IMPORTANT: make sure the machine is levelly positioned.
• If you want to stack this appliance, stack them on their tops with the same orientation.
• Do not stack more than three units of this appliance.
PROBLEM POSSIBLE CAUSE SOLUTION
Dehumidifier
does not start
No electricity. Check for power supply.
The power cord is not properly
plugged in.
Remove and reconnect the
power cord.
Dehumidifier
runs but humidity
level does not
decrease
The dehumidification system is
within startup process.
Wait for 3 minutes
(180 seconds) until the
dehumidification light stops
blinking.
The humidity level setting is
too high.
Decrease the humidity level
setting.
The working area is not
enclosed.
Make sure the area is tightly
sealed.
There are other sources of
humidity in the room.
Remove these sources or wait
until they completely volatilize.
The humidity level has reached
the setting level.
Decrease the humidity level
setting, set to constant
dehumidification mode, wait
until the humidity level rises up
again.
Clean the surface
• Use a damp cloth to wipe the surface of the housing. Do not clean the unit with water
directly.
• Do not clean the fins of the evaporator and condenser by yourself.