Use and Care Guide
English - 12
Installation and Operation Guide
Start Your Job (Continued)
Drainage (Important)
• Press the Manual Drainage button to process drainage manually. It will last for 3
minutes (180 seconds) and won’t stop dehumidification or defrosting process.
• On dehumidification mode, the machine will automatically process drainage for
2 minutes (120 seconds) every 15 minutes (900 seconds). This won’t stop the
dehumidification process.
• If the water tank is full or not positioned horizontally, the water tank full indicator light
will go on. Any dehumidification or defrosting process will pause and the machine will
automatically process drainage for 3 minutes (180 seconds). Afterwards, if the water
tank is still detected full, an error code will be displayed (See Page 10: Error Codes or
Page 15: Trouble Shooting Guide).
• When turned off, the machine will automatically process drainage for 75 seconds.
Please wait until this process completes.
Calculate the usage time
• Please remember to write down the ending time right before the machine
shuts down.
• Compare the starting time and the ending time to calculate the usage time.
CT
F/C
:
°C
%RH
TOTAL TIME
(Continued)
Secondary Intake (Open)
Secondary Intake (Closed)
Secondary Intake Cover
Important: Close the secondary intake when environment temperature falls
under 64 °F (18 °C) or in contaminated environment for better efciency
• Take out and flip the secondary intake cover along the short edge.
• Reinstall the secondary intake cover. The secondary intake is now covered.
!