Use and Care Manual

Operation
1) With the unit unplugged, carefully place the XPOWER unit on a stable, flat, and dry surface.
2) Plug the cord into a grounded G.F.C.I. outlet only, the use of a 3-prong to 2-prong adapter
is strictly prohibited.
3) Turn on the switch to make sure the axial air mover is operating correctly.
4) To reduce the risk of injury, close supervision is necessary when an appliance is used near
children. Do not allow children to play with or around an Axial Air Mover at any time.
Daisy Chain
If utilizing the Daisy-Chain feature, only allow up to two additional axial fans or other devices
running together on total 12 AMPs circuit. X-35AR & X-48ATR axial air movers have an on-board
circuit breaker. If the auxiliary outlet overloads, the circuit breaker will trip. If the breaker does trip,
unplug the units and press the circuit breaker Reset button. Plug the units back into the power
source and turn on the switch.
Timer (for X-48ATR)
Model X-48ATR using a timer can be set up to 3 hours long. After the timer expires, the axial air
mover will turn off while the speed control will be at the last set position. Set position to off and
then again at a desired speed to continue operation.
Rack
The unit includes a durable and sturdy rack which allows 360° full angle rotation.
- 4 -