Use and Care Manual
1) With the unit unplugged, carefully place the XPOWER unit on stable, flat, and dry surface.
2) Plug the cord into a grounded G.F.C.I. outlet only, the use of a 3-prong to 2-prong adapter is
strictly prohibited.
3) Turn on the switch to make sure the fan is operang correctly.
4) All fans in operaon must be supervised at all mes.
OPERATION
Daisy Chain
If ulizing the Daisy-Chain feature, only use devices under 4 AMPS for 12-AMP circuit.
X-41ATR axial fan has an on-board Circuit Breaker. If the Auxiliary Outlet overloads, the Circuit
Breaker will trip. If the Breaker does trip ,unplug the units and press the Circuit Breaker Reset
buon. Plug the units back into the power source and turn on the switch.
Timer
Models using a mer can be set up to 3 hours long. Aer the mer expires, the fan will turn off
while the speed control will be at the last set posion. Set posion to off and then again at a
desired speed to connue operaon.