Use and Care Manual
1) With the unit unplugged, carefully place the XPOWER unit on stable, flat, and dry surface.
2) Plug the cord into a grounded G.F.C.I. outlet only, the use of a 3-prong to 2-prong adapter is
strictly prohibited.
3) Turn on the switch to make sure the fan is operang correctly.
4) All fans in operaon must be supervised at all mes.
OPERATION
Daisy Chain
If ulizing the Daisy-Chain feature, only use devices under 4 AMPS for 12-AMP circuit.
X-41ATR axial fan has an on-board Circuit Breaker. If the Auxiliary Outlet overloads, the Circuit
Breaker will trip. If the Breaker does trip ,unplug the units and press the Circuit Breaker Reset
buon. Plug the units back into the power source and turn on the switch.
Timer
Models using a mer can be set up to 3 hours long. Aer the mer expires, the fan will turn off
while the speed control will be at the last set posion. Set posion to off and then again at a
desired speed to connue operaon.
SAFETY INSTRUCTIONS (cont’d)
5. Do not operate any unit with a damaged cord or plug. Discard fan or return to an authorized
service facility for examinaon and/or repair.
6. It’s automacally operated device. To reduce the risk of injury disconnect from power supply
before servicing.
7. Do not run cord under carpeng. Do not cover cord with throw rugs, runners, or similar
coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area
and where it will not be tripped over.
8. Do not allow children to play with or around an air mover at any me.
9. Do not move or carry the air mover while unit is operang.
10. All air movers in operaon must be supervised at all mes.
11. Keep air intakes and exhausts clean at all mes to avoid clogging or blocking in order to
prevent overheang the unit. Blocking the air intake could result in a fire or electrical hazards.
12. To prevent injury to persons and to avoid objects from coming in contact with the fan blade,
do not remove any screens or safety guards from this unit. Damage in this manner will void
your warranty.
13. Always place the fan on a smooth and level surface for safe operaon.
14. Do not use unit if defecve or damaged.
15. Unplug the unit before performing any maintenance, cleaning, or servicing.
16. The axial fan must be supervised at all mes during operaon.
17. Any misuse or abuse of this product will void the warranty.