Use and Care Manual

English - 7
Start Your Job (Continued)
Start Fogging
• IMPORTANT: Make sure the fogging volume control is on the lowest setting before
turning the power on.
• Turn on the machine. IMPORTANT: To avoid permanent damage to battery, DO NOT
turn on and off the machine frequently in a short time.
• Turn the fogging volume control counterclockwise to set designated fogging volume.
• IMPORTANT: When the battery capacity is 20% or lower, in order to protect the battery,
the preset program will stop the machine and prohibit the machine from working again.
Please charge the battery in this case. (See Page 6: Charge the Battery)
usage and please turn the unit off (in the “O” position) before charging.
Filling the Solution Tank
• IMPORTANT: Always turn the fogging volume control to the lowest setting before filling
the solution tank.
• Turn counterclockwise to open the solution tank cover, and fill designated solution or
liquid into the solution tank. Do not exceed the maximum capacity of the solution tank.
(See Page 9: Fogging System Maintenance) Close the solution tank cover.
• WARNING: Filling these types of solution / liquid into the solution tank may cause
safety hazards, corrosive damages to the machine or blockage of the fogging system:
(1) Strong acids, strong bases or other corrosive liquids
(2) Alcohol, or flammable or explosive liquids
(3) Oil, or other organic oils
(4) Liquids containing particles or sediments.
(5) Detergents
• IMPORTANT: If you intend to fill the solution of the types mentioned above, please
contact the manufacturer of the solution for usage reference and proper methods of
cleaning. (See Page 9: Fogging System Maintenance)