Quick Start Guide

Assembly Instructions
EN-4
EN
ASSEMBLY INSTRUCTIONS
Q Assembling the Xplova NOZA S
1. Open the packing box, remove the Styrofoam
top cover and take out installation tools and
accessories from the accessory bag.
• For front bottom tube installation use:
spring washer * 1, flat washer * 1,
hexagon bolt * 1, tuning knob * 1
• For rear bottom tube installation use:
square head hexagon bolt * 2,
hexagon nut * 2, decorative bolt cover * 2
2. Take out the NOZA S bike trainer main unit and front bottom tube from the
Styrofoam bottom cover and install according to the illustrations.
TIP: Press down the spring button when
installing. When installation is done, make
sure the button goes through the locating hole
on the front leg.
NOZA S bike trainer main unit
Front leg
Diagram of completed front leg installation