Windows 10

3. Press and release Function button 3. Ensure that the scan beam covers the entire barcode. (The

best scans are typically from six to seven inches from the barcode.)

If the scan is successful, the data appears in the application and you hear the confirmation

beep.

Using the RFID Reader

1. Open the Xplore RFID Demo (MCRIFD.exe) utility or the RFID scanning application installed by

you system administrator.

2. Hold the RFID tag and ensure that the tag is 1-1.5 inches (25-40mm) from the RFID antenna

scan area.

3. If you are using the Xplore RFID Demo utility, tap Refresh UID and Tag Data. If you are using

another application, please use according to the documentation.

The Tablet will beep to indicate a successful scan.