Windows 10

20
Configuring the Tablet Functions Buttons
You can configure the three function buttons on the front of the tablet. Each has two functions.
1. Open the Tablet Center.
2. In the Tablet Center form with hightlighted in the left pane, tap
in the right pane.
The Tablet PC Settings form opens.
3. In the Tablet PC Settings form, tap the Buttons tab.
Use this tab to configure the Functions buttons.
4. Select the primary or secondary orientation for which you want to change the button settings
from the Button settings for drop-down list.
Tip: You can configure different button setting for different orientations.
5. Select the button to change.
The currently selected button is shown in red on the form.
6. Tap Change.
7. Select the appropriate action for the button.
8. For some actions, you must enter more information, such as the location of the program to
start. You can select an action for Press and another for Press and Hold.
9. Click OK to confirm the changes you have made.
10. To reset the buttons to their default values, tap the Reset button on the Buttons tab.
11. Click OK to close the Buttons form when you are done.
Buttons tab
Button 3
One column for Press and One
for Press and hold