User manual
Table Of Contents
- 1 Getting Started 19
- 2 Using the Tablet 31
- 3 Maintaining the Tablet 73
- Welcome
- 1 Getting Started
- 2 Using the Tablet
- Turning on the computer
- Turning off the computer
- Suspending and resuming operation
- Using the pen
- Using the fingerprint scanner
- Changing the screen orientation
- Adjusting the screen brightness
- Docking the tablet
- Connecting devices
- Using the battery
- Using power options
- Accessing the Solid State Drive (SSD) cartridge
- Accessing the MicroSD and SIM compartment
- Programming hot keys
- 3 Maintaining the Tablet
- A Troubleshooting
- B Using BIOS and AOS Functions
- C Glossary
- D Hardware Specifications
- E Agency Notices
- F Environmental Policy and Recycling Program
- Index
Chapter 1. Getting Started
LED indicators
XC6 User’s Handbook 27
off (no light) all
conditions
all conditions Off or Hibernating (or
any Night Vision mode)
blue,
continuous
all
conditions
all conditions On. Front or rear
camera is active.
red, blinking
quickly
not
plugged in
discharging
< 10%
On Plug the tablet into an AC/DC power
source or install a charged battery.
red,
continuous
not
plugged in
discharging
< 3%
On Plug the tablet into an AC/DC power
source or install a charged battery.
installed Off Battery is critically low.Plug the tablet
into an AC/DC power source or install
a charged battery.
or
The tablet has encountered a fault and
is not operating normally. Contact your
computer support personnel, such as
your help desk.
amber,
continuous
all
conditions
installed High temperature
threshold has been
exceeded.
amber/green,
blinking
quickly
all
conditions
installed Critical temperature
threshold has been
exceeded.
Table 1 Status LED indicator states (continued)
LED state AC adapter Battery Tablet mode Action required (if any)