Quick Start

To charge the battery while it is installed in the computer:
Connect an approved power source,
such as an AC adapter or cigarette
lighter adapter (CLA), to the power
port on the tablet.
When the power source is connected
to the wall socket or vehicle socket,
the battery begins charging and the
Status LED flashes green.
The charging process continues until
the battery charge reaches 100%,
at which point the Status LED glows
solid green.
OPEN ME FIRST Quick Start Guide
This document assists you with the
setup and basic operation of your
new rugged tablet computer.
The
iX104C6 Users Handbook
contains complete information and
is located on the tablets hard disk.
To access the handbook, click Start;
then
select the Xplore option from
the menu. The handbook opens and
displays the Table of Contents.
Unpacking the Tablet
1
Make sure your package includes the following items.
(NOTE: Your project team may remove items that you do not need.
If items are missing, contact your project team leader.)
Tablet computer
• Battery pack
attached to the tablet computer
AC adapter
Power cord
The AC adapter is 19V, 3.42A. See the
iX104C5 Users Handbook,
for
safety instructions regarding the AC adapter and operation of the tablet.
Installing the Battery Pack
2
1. Orient the battery with the slides in the empty
battery tray.
2. Slide the battery into the tray and press it firmly
until it is seated.
3. The battery release latch will slide to its original
position. The lock button pops back into the locked
position, securing the battery in place.
Your battery ships with some level of charge, but Xplore Technologies recommends
that you fully charge the battery before first use. Charging the battery typically
takes 1.5 to 2.5 hours (depending on the size of the battery included with your
computer).
Charging the Battery
3
Turning On the
Computer
4
1. Make sure the battery is charged or
that the tablet is plugged into an
external power source.
2. Press
the Power (ON/OFF)/
Backlight (ON/OFF)/Resume
button.
Adjusting the
Screen Brightness
5
Power port
Status LED
Power (ON/OFF)/Backlight
(ON/OFF)/Resume button
To adjust the screen brightness,
click the power management icon
on the Windows taskbar; then
select Adjust screen brightness.
Power management icon
Warranty information card
Declaration of Conformity
Cleaning cloth
Adjust slider bar in power options
menu to change screen brightness.
iX104C6
Stylus (pen) with tether

Summary of content (2 pages)