Quick Start

ManualsBrandsXplore Zebra ManualsGraphics TabletsL10 (Windows 10)

L10 Quick Start Guide Overview of the XSLATE L10 Tablet 1

L10 Quick Start Guide

L10 Tablet PC Models

There are three models in the Xplore™ L10 Platform. Each tablet is different from the other two.

Important: For all important safety information about your tablet, it is necessary to read the

Safety and Regulatory Guide. To download this information, click HERE.

Overview of the XSLATE L10 Tablet

Front of the XSLATE L10 Tablet PC

XSLATE™ L10 has no handle but is otherwise like the

XPAD model.

XBOOK™ L10 is the same as the XSLATE but includes a

companion keyboard and kickstrap.

XPAD™ L10 is distinguished by its integrated hard

handle. The handle has space for an integrated

barcode reader option, two programmable buttons

and a front facing speaker.

Touchscreen

Front

Ambient light

sensor camera

Camera

indicator

Fingerprint

reader

Microphones

Indicator

LEDs

Kill

System status

Battery status

SSD Activity

Home button

switch

8/31/18

Summary of content (8 pages)

PAGE 1
L10 Quick Start Guide L10 Tablet PC Models There are three models in the Xplore™ L10 Platform. Each tablet is different from the other two. ® TM TM XSLATE™ L10 has no handle but is otherwise like the XPAD model. XBOOK™ L10 is the same as the XSLATE but includes a companion keyboard and kickstrap. XPAD™ L10 is distinguished by its integrated hard handle. The handle has space for an integrated barcode reader option, two programmable buttons and a front facing speaker.
PAGE 2
Back of the XSLATE L10 Pen holder and pen Battery latch Camera light 13 megapixel camera Kensington lock slot Fan intake Fan exhaust Antenna pass-through ports (optional) RFID/NFC (optional) Expansion port cover Battery Speaker Right Side of the XSLATE L10 Power input Ethernet jack 2 Overview of the XSLATE L10 Tablet Volume control Power button Secure Attention Sequence (SAS) Multifunction port L10 QuickStart Guide
PAGE 3
Left Side of the XSLATE L10 Fan exhaust Memory card slot Locking Door Headset jack Two USB 3.1 USB type-C port Bottom Side of XSLATE and XPAD Tablets Docking connectors Pens for the L10 Tablets All L10 tablets support touch input with your finger. In addition, a pen or stylus is provided with your tablet, and is compatible with the screen configuration that you order. The XSLATE and XBOOK tablets come with short pens that fit in the pen holder. The XPAD tablet includes a longer, thicker pen.
PAGE 4
Overview of the XPAD L10 Tablet The following photos show the locations the external features on the XPAD™ L10 Tablet PC. Note: In these photos, the light gray text indicates a feature that is described for the XSLATE L10 and is the same on the XPAD L10. See page 1 to page 3 for the XSLATE overview. The blue text indicates that the feature is available only on the XPAD or is located in a different place on the XPAD tablet.
PAGE 5
Back of the XPAD L10 Tether post for pen Camera light 13 megapixel camera Battery latch Kensington lock slot Fan intake Fan output Antenna pass-through ports (optional) RFID/NFC (optional) Expansion port cover Battery Left Side of the XPAD L10 Barcode scanner Fan Memory card slot Two USB Headset 3.1 ports jack USB Type-C The barcode scanner is optional.
PAGE 6
Top Side of the XPAD L10 Pen Holder Barcode scanner button Preparing the L10 Tablet for First Use This section has steps for setting up the L10 platform for the first use. Inserting a SIM Card If your L10 tablet is enabled with Wireless Wide Area Networking (WWAN), you need an activated SIM card in the SIM card holder to access the cellular data network. The SIM holder is located in the battery bay of the L10 and can hold one or two Nano SIMs (4FF).
PAGE 7
Powering Up the Tablet 1. Remove the battery from the packaging. On the back of the tablet, insert the bottom of the battery into the bay. Tilt the battery as shown and press it down until it clicks securely into place. Insert this end of the battery first. 2. The external power has two parts: the part that plugs into the power source and the adapter with a cord that plugs into your tablet. Join the two parts by plugging the power cord into the adapter to form one long cord. 3.
PAGE 8
Optional Setup Tasks Backing Up Files and Creating a Recovery Drive After setting up the L10 the way you like it and installing applications, create a recovery drive on an external USB drive. A recovery drive lets you start your tablet and access recovery and troubleshooting tools if you encounter any issues with your Windows installation. For more information, see the L10 User Guide Attaching the Pen Tether The pen comes with a tether so that you can attach it to your tablet to avoid misplacing it.