User manual
Table Of Contents
- Contents
- About This Guide
- Getting Started
- Using the Device
- Software
- Data Capture
- Wireless
- Accessories
- Maintenance and Troubleshooting
- Specifications
Data Capture
3. Press and hold the Barcode Scanning button (1) on top of the handle.
4. Ensure the barcode is within the area formed by the aiming pattern.The aiming dot is used for
increased visibility in bright lighting conditions.
Figure 9 Aiming Pattern
NOTE: When the device is in Pick List Mode, the device does not decode the barcode until
the center of the crosshair touches the barcode.
Figure 10Aiming Pattern - Picklist
TheData CaptureLEDlight green and a beep sounds, by default, to indicate the barcode was decoded
successfully.
5. Release thescan button.
The barcode content data appears in the text field.
43