Quick Start

L10ax Quick Start Guide
2. Aim the scanner lens at the barcode.
3. Press and hold the Barcode Scanning button (1) on top of the handle.
4. Ensure the barcode is within the area formed by the aiming pattern.The aiming dot is used for
increased visibility in bright lighting conditions.
Figure 3 Aiming Pattern
NOTE: When the device is in Pick List Mode, the device does not decode the barcode until
the center of the crosshair touches the barcode.
Figure 4Aiming Pattern - Picklist
TheData CaptureLEDlight green and a beep sounds, by default, to indicate the barcode was decoded
successfully.
5. Release thescan button.
The barcode content data appears in the text field.
14