User manual

Getting Started
23
6.
Install the battery in the tablet. See Replacing the Battery on page 27.
Powering Up the Tablet
This section explains installing the battery, connecting the tablet to external power, and powering up the
tablet.
1. If you have not yet inserted the battery, remove it from the packaging. On the back of the tablet, insert
the bottom of the battery into the bay. Tilt the tray as shown and press it down until it clicks securely into
place.
2. The external power has two parts: the part that plugs into the power source and the adapter with a cord
that plugs into your tablet. Join the two parts by plugging the power cord into the adapter to form one
long cord.
To connect external power to the tablet, open the port door to expose the power adapter port. Plug the AC
adapter into this port on your tablet.
1. Plug the power cord into an outlet.
The battery charging indicator on the front of the L10 tablet blinks amber to indicate that the battery is
charging. It is solid green when fully charged.
2. Press and release the oval Power button in the center of the right side of the tablet to turn it on.
3. Keep the tablet on AC power until the battery is fully charged. However, you don’t have to wait until the
tablet is fully charged to turn it on. The L10 will charge while you use it.
1 Power adapter port.
1 Power button
1
1