User manual
Table Of Contents
- Copyright
- Terms of Use
- Revision History
- Table of Contents
- About this Guide
- Getting Started
- Using the Device
- Applications
- Settings
- Wireless
- Data Capture
- Operational Modes
- Scanning Considerations
- Integrated Barcode Scanner (XPAD Only)
- RS507/RS507X Hands-Free Imager
- RS5100 Ring Scanner
- RS6000 Bluetooth Ring Scanner
- DS3608 Digital Scanner
- Scanning with the Barcode Scanner (XPAD Only)
- Scanning with RS507/RS507X Hands-Free Imager
- Scanning with RS5100 Ring Scanner
- Scanning with RS6000 Bluetooth Ring Scanner
- Scanning with the DS3608 Scanner
- Pairing the RS507/RS5100/RS6000 Ring Scanner
- Pairing a Bluetooth Scanner
- Connecting a USB Scanner
- DataWedge
- Accessories
- Application Deployment
- Maintenance and Troubleshooting
- Specifications
- Index
Application Deployment
110
4.
Eject the USB drive from the host computer.
5. Open the locking door on the side of the device. See Figure 4 on page 18.
6. Plug the USB drive into the USB port on the device, see Figure 4 on page 18. A notification appears
indicating that the device detected the USB drive.
7. Swipe the screen up and select to view files on the USB drive.
8. Touch General USB drive.
9. Locate the application
.apk
file.
10. Touch the application file.
11.Touch Continue. to install the app or Cancel to stop the installation.
12.To confirm installation and accept what the application affects, touch Install otherwise touch Cancel.
13.Touch Open to open the application or Done to exit the installation process. The application appears in
the App list.
14.Disconnect the USB drive from the device.
Installing Applications Using the USB Connection
CAUTION: When connecting the device to a host computer and mounting the microSD card, follow the
host computer’s instructions for connecting and disconnecting USB devices, to avoid damaging or
corrupting files.
1. Connect the device to a host computer using the USB-C cable.
2. Pull down the Notification panel and touch Charging this device via USB.
3. Touch File Transfer.
4. On the host computer, open a file manager application.
5. On the host computer, copy the application .apk file from the host computer to the device.
6. Disconnect the device from the host computer.
7. Swipe the screen up and select to view files on the Internal Storage.
8. Locate the application .apk file.
9. Touch the application file.
10. Touch Continue to install the app or Cancel to stop the installation.
11. To confirm installation and accept what the application affects, touch Install otherwise touch Cancel.
12. Touch Open to open the application or Done to exit the installation process. The application appears in
the App list.
Installing Applications Using a microSD Card
CAUTION: When connecting the device to a host computer and mounting its microSD card, follow the host
computer’s instructions for connecting and disconnecting USB devices, to avoid damaging or corrupting
files.
It is strongly recommended that prior to use, you must format the microSD card on the device.
1. Copy the apk file to the root of the microSD card.