User manual

Chapter 2. Using the iX104C3
Accessing the PCMCIA compartment
54 iX104C
3
User’s Handbook
Accessing the PCMCIA compartment
When you install a PCMCIA card, follow the instructions in this
section to access the PCMCIA compartment.
WARNING Failure to follow this procedure can result in
damage to the case and the cover, which is not
covered under the Xplore Technologies warranty.
1.
Turn off the computer.
2. Remove all power from the unit, including batteries and other
power sources such as power supplies, cigarette lighter adapters,
and mobile power sources.
3. Remove the battery. (See “Removing and installing the battery”
on page 45.)
4. Use an M1 Philips screwdriver to remove the 6 screws from the
compartment cover. (Do not use a power screwdriver.)
6 screws
ix104.book Page 54 Tuesday, August 29, 2006 10:30 AM