User manual

Chapter 2. Using the iX104C3
Adjusting the screen brightness
iX104C
3
User’s Handbook 39
Adjusting the screen brightness
To adjust the screen brightness, click the brightness control icon on
the Windows taskbar; then use the slider bar to make the adjustment.
Enabling automatic backlight control
When the ambient light sensor is enabled, the computer automatically
controls the amount of backlight sent to the screen to provide
optimum brightness for the lighting conditions in which you are
working.
When the ambient light sensor is enabled, the
Brightness LED glows
continuously green. When the ambient light sensor is disabled and the
backlight is under manual control, the
Brightness/HDD LED indicates
hard disk drive activity.
To enable automatic backlight control, see page 78.
brightness control icon
Brightness/HDD LED
ix104.book Page 39 Tuesday, August 29, 2006 10:30 AM