User manual
Table Of Contents
- Contents
- 1 Getting Started 21
- 2 Using the iX104 35
- 3 Maintaining the iX104 75
- Welcome
- 1 Getting Started
- 2 Using the iX104
- Turning on the computer
- Turning off the computer
- Suspending and resuming operation
- Using the pen
- Using the joystick (the navigation control key)
- Changing the screen orientation
- Adjusting the screen brightness
- Docking the iX104
- Connecting devices
- Using the battery
- Programming hot keys
- 3 Maintaining the iX104
- A Troubleshooting
- B Using BIOS and AOS Functions
- C Glossary
- D Hardware Specifications
- E Agency Notices
- Index
Chapter 2. Using the iX104
Using the battery
iX104 User’s Handbook 57
2. Check the level of charge. (See “Checking battery power status”
on page 62.)
The charging process continues until the battery charge reaches
100%.
Table 5 shows the approximate time required to charge the battery
level to 100%.
If you have an external battery charger
1. Remove the battery pack (see page 58).
2. Use the external battery charger to charge the battery.
3. Install the battery (see page 60).
Table 5 Approximate battery charge time
Battery pack
capacity Charge time
4500 mAh 2.5 hours
9000 mAh 3.5 hours