User manual
Table Of Contents
- Contents
- 1 Getting Started 21
- 2 Using the iX104 35
- 3 Maintaining the iX104 75
- Welcome
- 1 Getting Started
- 2 Using the iX104
- Turning on the computer
- Turning off the computer
- Suspending and resuming operation
- Using the pen
- Using the joystick (the navigation control key)
- Changing the screen orientation
- Adjusting the screen brightness
- Docking the iX104
- Connecting devices
- Using the battery
- Programming hot keys
- 3 Maintaining the iX104
- A Troubleshooting
- B Using BIOS and AOS Functions
- C Glossary
- D Hardware Specifications
- E Agency Notices
- Index
Chapter 1. Getting Started
Quick-start guide
32 iX104 User’s Handbook
Table 4 Function mode keys
Press these keys... To perform this function
Dim the brightness of the LCD backlight.
Increase the brightness of the LCD backlight.
Send video display to a monitor or projection
panel connected to the computer (and back to the
computer again). (This key combination is not
programmable.)
Default function:
iX104R or iX104T: Open a pre-defined program
(see “Programming hot keys to start applications,
open documents, or go to a Web site” on
page 66).
iX104RD or iX104TD: Select Active mode or
Touch mode. This determines the input devices
you can use. In Active mode, you can use only the
pen. In Touch mode, you can use the pen, your
finger, or another similar pointing device. You can
program this key combination to perform a
different function. (See “Programming hot keys to
start applications, open documents, or go to a
Web site” on page 66.)
Default function: Open the pen calibration
program. You can program this key combination
to perform a different function.
Perform the same functions as the Esc key on a
keyboard.