Quick Start Guide for Windows 10

ET80/ET85 Quick Start Guide
16
Powering On the Tablet
• Press and hold the Power button for at least one second, then release.
Scanning with Internal Imager
To read a barcode, a scan-enabled app is required.
1. Ensure that an app is open on the tablet and a text field is in focus (text cursor in text field).
2. Point the scanner exit window at a barcode.
3. Press and hold the Scan button (1). The aiming pattern turns on to assist in aiming.
4. Ensure the barcode is within the area formed by the aiming pattern. The aiming dot increases visibility
in bright lighting conditions.
A beep sounds to indicate the barcode was decoded successfully. When the Internal Scanner is in Pick
List mode, the tablet does not decode the barcode until the aiming dot touches the barcode.
Figure 6 Internal Scanner Aiming Pattern
Figure 7 Internal Scanner Pick List Mode with Multiple Barcodes in Aiming Pattern
5. Release the scan button. The captured data appears in the text field.
1