U.M. Android v6.0.1
Table Of Contents
- Copyright
- Terms of Use
- Revision History
- Table of Contents
- About This Guide
- Getting Started
- Using the Tablet
- Introduction
- Google Mobile Services
- Home Screen
- Applications
- Suspend Mode
- Rebooting the ET5X
- Applications
- Wireless
- Data Capture
- Expansion Back
- RS507 Hands-Free Imager
- RS6000 Bluetooth Ring Scanner
- Scanning Considerations
- Imaging
- Bar Code Capture Using the SE4750 Expansion Back
- Bar Code Capture Using RS507 Hands-Free Imager
- Bar Code Capture Using RS6000 Bluetooth Scanner
- Bar Code Capture with DS36X8 Scanner
- Pairing the RS507/RS6000 Using SSI
- Connecting a DS3608 USB Scanner
- Pairing a DS3678 Bluetooth Scanner
- Accessories
- Maintenance and Troubleshooting
- Specifications
- Index
Accessories
130
Using the 4-Slot Battery Charger
Use the 4-Slot Battery Charger to charge up to four Power Packs.
Figure 104 4-Slot Battery Charger
Charging the Power Pack
Charge Power Packs in ambient temperatures from 0°C to 40°C (32°F to 104°F) as reported by the Power Pack.
Charging is intelligently controlled by the charger. To accomplish this, for small periods of time, the charger
alternately enables and disables Power Pack charging to keep the battery at acceptable temperatures.
The Power Pack charge LED shows the status of the battery charging in the charger. See Power Pack Charge
Status Indicators on page 131 for charging status indications.
The Power Pack charges in less than three hours.
When charging, the Charge LEDs indicate the charge level.
Figure 105 Power Pack Charge LEDs
CAUTION Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page
132.
Charge Level Indicators