U.M. Android v6.0.1

Data Capture
100
Figure 63 SE4750 Expansion Back Aiming Pattern
5. Release the Scan button. The bar code data displays on the screen.
Bar Code Capture Using RS507 Hands-Free Imager
Pair the RS507 with the ET5x. See Pairing the RS507/RS6000 Using SSI on page 104 or Pairing the
RS507/RS6000 Using HID on page 104
for more information.
1. Ensure that an application is open on the device and a text field is in focus (text cursor in text field).
2. Point the RS507 at a bar code.
Figure 64 Bar Code Scanning with RS507
3. Press and hold the trigger.
The red laser aiming pattern turns on to assist in aiming. Ensure the bar code is within the area formed by the
cross-hairs in the aiming pattern. The aiming dot is used for increased visibility in bright lighting conditions.
The RS507 LEDs light green, a beep sounds to indicate the bar code was decoded successfully. Note that
when the RS507 is in Pick List Mode, the RS507 does not decode the bar code until the center of the crosshair
touches the bar code.