U.M. Android v5.1.1

Wireless 4 - 19
4. Touch .
Disabling Bluetooth
1. Touch Bluetooth.
2. Slide the switch to the left. OFF appears.
3. Touch .
Discovering Bluetooth Device(s)
The ET5X can receive information from discovered devices without pairing. However, once paired, the ET5X and a
paired device exchange information automatically when the Bluetooth radio is on. To find Bluetooth devices in the
area:
1. Ensure that Bluetooth is enabled on both devices.
2. Ensure that the Bluetooth device to discover is in discoverable mode.
3. Ensure that the two devices are within 10 meters (32.8 feet) of one another.
4. Swipe down with two fingers from the status bar to open the quick access panel and then touch .
5. Touch Bluetooth.
6. The ET5X begins searching for discoverable Bluetooth devices in the area and displays them under Available
devices.
7. Scroll through the list and select a device. The Bluetooth pairing request dialog box appears.
Figure 4-13 Bluetooth Pairing
8.
9.
Touch Pair on both devices.
10. The Bluetooth device is added to the Paired devices list and a trusted (“paired”) connection is established.
Changing the Bluetooth Name
By default, the ET5X has a generic Bluetooth name that is visible to other devices when connected.
1. Swipe down with two fingers from the status bar to open the quick access panel and then touch .
2. Touch Bluetooth.
NOTE For older Bluetooth devices, Enter a PIN in the text box and touch OK. Enter the same PIN on the other
device.