U.M. Android v5.1.1

Accessories 6 - 5
Installing the Insert
Install the tall insert when using an ET5X without a Rugged Frame or Expansion Back. Install the small insert when using an
ET5X with an Expansion Back and without a Rugged Frame.
1.
Align the insert over the pins.
Figure 6-3 Align Insert with Cradle
2. Press the insert down until it seats flush in the cradle.
Charging the ET5X
To charge the ET5X in the Charge Only Cradle:
1. Align the ET5X with the alignment pins on the cradle.
2. Insert the ET5X into the cradle.
Figure 6-4 Insert ET5X into Charge Only Cradle