Integrator Guide for Windows 10

3 - 4 ET5X Integrator Guide for Windows 10
Figure 3-5 Copy Boot Files to Thumb Drive
9. Ensure that all the files copied successfully.
10. On the host computer, unmount the thumb drive.
Setup Using Communication Dock
The following is required:
• ET5X tablet
• USB keyboard
• Communication Dock with power supply.
• Bootable installation USB thumb drive.
1. Connect power to the Communication Dock.
2. Insert the ET5X into the Communication Dock.
3. Plug the USB keyboard connector into a USB port on the back of the dock.
4. Plug the bootable USB thumb drive into the USB port on the side of the ET5X.
Setup Using a USB Hub
The following is required:
• ET5X tablet
• USB keyboard
CAUTION Carefully follow the host computer’s instructions to unmount the thumb drive and disconnect the drive
correctly to avoid losing information.
CAUTION Do not plug the USB thumb drive into the USB port on the back of the cradle.