Integrator Guide for Windows 10

Accessories 2 - 35
Figure 2-47 Secure Strap
Attaching the Stylus to the Expansion Back
The Expansion Backs provide a holder for the stylus. To install the stylus onto the Expansion Back with th option
tether:
1. Insert one loop of the tether into the hole in the stylus end cap.
Figure 2-48 Insert Loop
2. Feed the other end of the tether through the loop.
Figure 2-49 Feed Tether Through Loop
3. Pull the tether all the way through the loop.
4. Insert the loop of the tether through the eyelet on the hand strap of the Expansion Back.
5. Feed the stylus through the loop.