U.M. Windows 10
Table Of Contents
- Copyright
- Terms of Use
- Revision History
- About This Guide
- Getting Started
- Introduction
- Unpacking
- Features
- Getting Started
- Replacing the SIM Card
- Replacing the microSD Card
- Using the Tablet
- Wireless
- Data Capture
- Expansion Back
- RS507/RS507X Hands-Free Imager
- RS6000 Bluetooth Ring Scanner
- DS3678 Digital Scanner
- Imaging
- Scanning Considerations
- Scanning with the SE4710 Expansion Back
- Scanning with SE4750 Expansion Back
- Scanning with RS507/RS507X Hands-Free Imager
- Scanning with RS6000 Bluetooth Ring Scanner
- Scanning with the DS3608 USB Scanner or DS3678 Bluetooth Scanner
- Pairing Bluetooth Scanners
- Connecting a USB Scanner
- Accessories
- Maintenance and Troubleshooting
- Specifications
- Index
Data Capture
60
DS3678 in SPP Mode
To pair the DS3678 scanner with the tablet using either Serial Port Profile (SPP) mode:
1. Remove the battery from the scanner.
2. Replace the battery.
3. After the scanner reboots, scan the barcode below to place the scanner in SPP mode.
Figure 51 DS3678 Bluetooth SPP Classic Barcode
4. In the taskbar, touch the Action Center icon.
5. Touch All Settings > Devices > Bluetooth & other devices.
6. Touch the plus sign to select Add Bluetooth or other device then in the Add a Device window, touch
Bluetooth.
7. Discoverable Bluetooth devices populate the window.
Figure 52 Add Bluetooth Device
8. Select DS3678. Wait for the connection and setup to complete.
9. Touch Done.
10.Right click on the Bluetooth icon and select Open Settings.
11.Scroll down to Related settings and touch More Bluetooth options.