U.M. Windows 10
Table Of Contents
- Copyright
- Terms of Use
- Revision History
- About This Guide
- Getting Started
- Introduction
- Unpacking
- Features
- Getting Started
- Replacing the SIM Card
- Replacing the microSD Card
- Using the Tablet
- Wireless
- Data Capture
- Expansion Back
- RS507/RS507X Hands-Free Imager
- RS6000 Bluetooth Ring Scanner
- DS3678 Digital Scanner
- Imaging
- Scanning Considerations
- Scanning with the SE4710 Expansion Back
- Scanning with SE4750 Expansion Back
- Scanning with RS507/RS507X Hands-Free Imager
- Scanning with RS6000 Bluetooth Ring Scanner
- Scanning with the DS3608 USB Scanner or DS3678 Bluetooth Scanner
- Pairing Bluetooth Scanners
- Connecting a USB Scanner
- Accessories
- Maintenance and Troubleshooting
- Specifications
- Index
Wireless
38
NOTE: To extend the battery, turn off Wi-Fi when not in use.
Connecting to a Wi-Fi Network
To establish a Wi-Fi network connection:
1. In the taskbar, touch the network icon. A list of available Wi-Fi networks displays.
2. Touch the network to connect.
Figure 22 Available Networks
3. Touch the Connect automatically checkbox to allow the tablet to connect automatically to this network
whenever the device is on.
4. Touch Connect.
5. If required, enter security key and then touch Next.
802.1x WEP
PEAP Secured password (EAP-MSCHAPv2)
Smart Card or other Certificate
EAP-TTLS
Unencrypted password (PAP)
CHAP
MS-CHAP
MS-CHAPv2
Smart Card or other Certificate
Secured password (EAP-MSCHAPv2)
EAP-SIM N/A
EAP-AKA N/A
EAP-AKA’ N/A
Table 7 WLAN Security Options (Continued)
Security Type Encryption EAP Method Authentication Method