U.M. Windows 10
Table Of Contents
- Copyright
- Terms of Use
- Revision History
- About This Guide
- Getting Started
- Introduction
- Unpacking
- Features
- Getting Started
- Replacing the SIM Card
- Replacing the microSD Card
- Using the Tablet
- Wireless
- Data Capture
- Expansion Back
- RS507/RS507X Hands-Free Imager
- RS6000 Bluetooth Ring Scanner
- DS3678 Digital Scanner
- Imaging
- Scanning Considerations
- Scanning with the SE4710 Expansion Back
- Scanning with SE4750 Expansion Back
- Scanning with RS507/RS507X Hands-Free Imager
- Scanning with RS6000 Bluetooth Ring Scanner
- Scanning with the DS3608 USB Scanner or DS3678 Bluetooth Scanner
- Pairing Bluetooth Scanners
- Connecting a USB Scanner
- Accessories
- Maintenance and Troubleshooting
- Specifications
- Index
Getting Started
16
Installing a microSD Card and nano SIM Card
To install a microSD card and/or a nano SIM card (ET56 only):
1. Press the Power button to turn off the device.
2. Lift the notched corner of the battery cover and carefully lift the battery cover off the device.
Figure 4 Lifting the Battery Cover
3. Carefully lift the battery cover off the device.
4. On the 8.4” version, push the two locking tabs up, then pull up on the tab to remove battery.
Figure 5 Removing the Battery
Install the microSD card
1. Insert the microSD card with contacts facing down.
Locking Tabs
Pull Tab