Integrator Guide for Windows

Getting Started 1 - 9
The main battery usually fully charges in less than three hours. If an Expansion Back is attached, the main battery
fully changes in less than 4.5 hours.
Resetting the ET5X
Resetting the ET5X returns Windows to original factory settings.
To reset the ET5X:
1. Swipe-in from the right edge of the display.
2. Touch Settings > Change PC settings > Update and recovery > Recovery.
3. Under Remove everything and reinstall Windows, touch Get started.
4. Read the warning and touch Next.
Table 1-1 Charging Indicator
LED Indication
Off ET5X is not in the cradle. ET5X is not seated properly. Cradle is not powered.
Orange ET5X is charging.
Green Charging complete.
Note: When the battery is initially inserted in the ET5X, the amber LED flashes once if the
battery power is low or the battery is not fully inserted.
Red Error in charging; check placement of the ET5X.
CAUTION Resetting the ET5X erases all data from the ET5X, including your account configuration, applications,
music, pictures and files. Make sure that you back up all the required data before you proceed.