User manual

Wireless
6. In the Security drop-down list, set the type of security to:
• None
• Enhanced Open
• WEP
• WPA/WPA2-Personal
• WPA3-Personal
• WPA/WPA2/WPA3-Enterprise
• WPA3-Enterprise 192-bit
7. If the network security is None or Enhanced Open, touch Save.
8. If the network security is None, touch Save.
9. If the network security is WEP, WPA3-Personal,or WPA/WPA2-Personal, enter the required password
and then touch Save.
10. If network security is WPA/WPA2/WPA3 Enterprise:
a) Touch the EAP method drop-down list and select one of the following:
• PEAP
• TLS
• TTLS
• PWD
• LEAP
b) Fill in the appropriate information. Options vary depending on the EAP method chosen.
• When selecting CA certificate, Certification Authority (CA) certificates are installed using the
Security settings.
• When using the EAP methods PEAP, TLS, or TTLS, specify a domain.
• Touch Advanced options to display additional network options.
11. If the network security is WPA3-Enterprise 192-bit:
• Touch CA certificate and select a Certification Authority (CA) certificate. Note: Certificates are
installed using the Security settings.
• Touch User certificate and select a user certificate. Note: User certificates are installed using the
Security settings.
• In the Identity text box, enter the username credentials.
NOTE: By default, the network Proxy is set to None and the IP settings is set to DHCP. See
Configuring for a Proxy Server on page 94 for setting the connection to a proxy server
and see Configuring the Device to Use a Static IP Address on page 94 for setting the
device to use a static IP address.
12. Touch Save. To connect to the saved network, touch and hold on the saved network and select
Connect to network.
93