User manual

Wireless
8. If network security is WPA/WPA2/WPA3 Enterprise:
a) Touch the EAP method drop-down list and select one of the following:
• PEAP
• TLS
• TTLS
• PWD
• SIM
• AKA
• AKA'
• LEAP
b) Fill in the appropriate information. Options vary depending on the EAP method chosen.
• When selecting CA certificate, Certification Authority (CA) certificates are installed using the
Security settings.
• When using the EAP methods PEAP, TLS, or TTLS, specify a domain.
• Touch Advanced options to display additional network options.
9. If the network security is WPA3-Enterprise 192-bit:
• Touch CA certificate and select a Certification Authority (CA) certificate. Note: Certificates are
installed using the Security settings.
• Touch User certificate and select a user certificate. Note: User certificates are installed using the
Security settings.
• In the Identity text box, enter the username credentials.
NOTE: By default, the network Proxy is set to None and the IP settings is set to DHCP. See
Configuring for a Proxy Server on page 94 for setting the connection to a proxy server
and see Configuring the Device to Use a Static IP Address on page 94 for setting the
device to use a static IP address.
10. Touch Connect.
Manually Adding a Wi-Fi Network
Manually add a Wi-Fi network if the network does not broadcast its name (SSID) or to add a Wi-Fi network
when out of range.
1. Go to Settings.
2. Touch Network & Internet > Wi-Fi.
3. Slide the Wi-Fi switch to the On position.
4. Scroll to the bottom of the list and select Add network.
5. In the Network name text box, enter the name of the Wi-Fi network.
92