User manual

Wireless
Setting Data Limit
1. Go to Settings.
2. Touch Network & internet > Mobile network > Data warning & limit.
3. Touch Set data limit.
4. Touch OK.
5. Touch Data limit.
6. Enter a number.
To switch between megabytes (MB) and gigabytes (GB), touch the down arrow.
7. Touch Set.
When the limit is reached, data automatically turns off and a notification appears.
Cellular Network Settings
Cellular network settings applies to WWAN devices only.
Data When Roaming
Roaming is disabled by default to prevent the device from transmitting data over other carriers’ mobile
networks when leaving an area that is covered by the carrier’s networks. This is useful for controlling
expenses if the service plan does not include data roaming.
Enabling MMS Messages
When mobile data is disabled, this feature allows you to send and receive MMS messages using Wi-Fi. This
option only displays when mobile data is disabled.
1. Go to Settings.
2. Touch Network & Internet > Mobile network > Mobile data.
3. Touch MMS messages.
4. If desired, touch Mobile data toturn mobile data back on.
You can now send and receive MMS messagesusing Wi-Fi whenever mobile datais disabled.
Setting Preferred Network Type
Change the network operating mode.
1. Go to Settings.
2. Touch Network & Internet > Mobile network > Preferred network type.
3. In the Preferred network type dialog box, select a mode to set as default.
• Automatic(NLW)
• NR 5G only
• LTE only
• 3G only
87