User manual
Table Of Contents
- Contents
- About this Guide
- Getting Started
- Using the Device
- Settings
- Applications
- Data Capture
- Imaging
- Scanning Considerations
- Scanning with an Internal Scanner
- Scanning with the Camera
- Scanning with the RS507/RS507X Hands-Free Imager
- Scanning with the RS5100 Ring Scanner
- Scanning with the RS6000 Bluetooth Ring Scanner
- Scanning with the DS2278 Digital Scanner
- Scanning with the DS3678 Bluetooth Scanner
- Scanning with the DS8178 Digital Scanner
- Scanning with the LI3678 Linear Imager
- DataWedge
- Supported Decoders
- Camera Supported Decoders
- SE4100 Internal Imager Supported Decoders
- SE4710 Internal Imager Supported Decoders
- SE4720 Internal Imager Supported Decoders
- RS507/RS507x Supported Decoders
- RS5100 Supported Decoders
- RS6000 Supported Decoders
- DS2278 Supported Decoders
- DS3678 Supported Decoders
- DS8178 Supported Decoders
- LI3678 Supported Decoders
- Wireless
- Accessories
- Application Deployment
- Maintenance and Troubleshooting
- Technical Specifications
Wireless
Wireless
This section provides information on the wireless features of the device.
Wireless Wide Area Networks
Use Wireless wide area networks (WWANs) to access data over a cellular network.
NOTE: ET45 only.
This section provides information on:
• Sharing a data connection
• Monitoring data usage
• Changing Cellular Network settings
Sharing the Mobile Data Connection
The Tethering & Portable Hotspot settings allow sharing the mobile data connection with a single
computer via USB tethering or Bluetooth tethering.
Share the data connection with up to eight devices at once, by turning it into a portable Wi-Fi hotspot.
While the device is sharing its data connection, an icon displays at the top of the screen and a
corresponding message appears in the notification list.
Enabling USB Tethering
NOTE: USB tethering is not supported on computers running Mac OS. If the computer is running
Windows or a recent version of Linux (such as Ubuntu), follow these instructions without any
special preparation. If running a version of Windows that precedes Windows 7, or some other
operating system, you may need to prepare the computer to establish a network connection via
USB.
1. Connect the device to a host computer with a USB cable.
The notification Charging this device via USB appears in the Notifications panel.
2. Go to Settings.
3. Touch Network & Internet.
4. Touch Hotspot & tethering.
84