User manual

Table Of Contents

Data Capture

4. Press and hold the trigger.

5. Ensure the aiming pattern covers the barcode.

Upon successful decode, the scanner beeps and the LED displays a single green flash.

The captured data appears in the text field.

DataWedge

DataWedge is a utility that adds advanced barcode scanning capability to any application without writing

code. It runs in the background and handles the interface to built-in barcode scanners. The captured

barcode data is converted to keystrokes and sent to the target application as if it was typed on the keypad.

DataWedge allows any app on the device to get data from input sources such as a barcode scanner, MSR,

RFID, voice, or serial port and manipulate the data based on options or rules.

Configure DataWedge to:

• Provide data capture services from any app.

• Use a particular scanner, reader, or other peripheral devices.

• Properly format and transmit data to a specific app.

To configure DataWedge, refer to techdocs.zebra.com/datawedge/.

Enabling DataWedge

This procedure provides information on how to enable DataWedge on the device.

Swipe up from the bottom of the Home screen and touch .