User manual

Data Capture
4. Press and hold the trigger.
The red laser aiming pattern turns on to assist in aiming. Ensure the barcode is within the area formed
by the cross-hairs in the aiming pattern. The aiming dot increases visibility in bright lighting conditions.
Figure 13RS5100 Aiming Pattern
When the RS5100 is in Pick List mode, the RS5100 does not decode the barcode until the center of the
crosshair touches the barcode.
Figure 14RS5100 Pick List Mode with Multiple Barcodes in Aiming Pattern
The RS5100 LEDs light green and a beep sounds to indicate the barcode was decoded successfully.
The captured data appears in the text field.
Scanning with the RS6000 Bluetooth Ring Scanner
Use the RS6000 Bluetooth Ring Scanner to capture barcode data.
Figure 15RS6000 Bluetooth Ring Scanner
65