User manual
Table Of Contents
- Contents
- About this Guide
- Getting Started
- Using the Device
- Settings
- Applications
- Data Capture
- Imaging
- Scanning Considerations
- Scanning with an Internal Scanner
- Scanning with the Camera
- Scanning with the RS507/RS507X Hands-Free Imager
- Scanning with the RS5100 Ring Scanner
- Scanning with the RS6000 Bluetooth Ring Scanner
- Scanning with the DS2278 Digital Scanner
- Scanning with the DS3678 Bluetooth Scanner
- Scanning with the DS8178 Digital Scanner
- Scanning with the LI3678 Linear Imager
- DataWedge
- Supported Decoders
- Camera Supported Decoders
- SE4100 Internal Imager Supported Decoders
- SE4710 Internal Imager Supported Decoders
- SE4720 Internal Imager Supported Decoders
- RS507/RS507x Supported Decoders
- RS5100 Supported Decoders
- RS6000 Supported Decoders
- DS2278 Supported Decoders
- DS3678 Supported Decoders
- DS8178 Supported Decoders
- LI3678 Supported Decoders
- Wireless
- Accessories
- Application Deployment
- Maintenance and Troubleshooting
- Technical Specifications
Applications
7.
Touch .
Recording Videos
Record videos using the device.
1. Swipe up from the bottom of the Home screen and touch Camera.
2. Select Video mode.
3.
To switch between the rear camera and front camera (if available), touch .
4. Point the camera and frame the scene.
5. To zoom in or out, use the Zoom slider or the Quick Zoom button.
6.
Touch to start recording.
The video time remaining appears in the top left of the screen.
7.
Touch to end the recording.
Camera Settings
In the Camera app, touch to display the camera settings options. Settings vary depending on whether
the front or rear camera is active and which camera mode is active.
• General
• GPS location - Turn On(default)or Off.
• Face Detection - Select to turn face detection Off (default) or On.
• Storage – Set the location to store the photo to: Phone or SD Card.
• Picture Format - All still images are saved in JPEG format.
53