User manual
Table Of Contents
- Contents
- About this Guide
- Getting Started
- Using the Device
- Settings
- Applications
- Data Capture
- Imaging
- Scanning Considerations
- Scanning with an Internal Scanner
- Scanning with the Camera
- Scanning with the RS507/RS507X Hands-Free Imager
- Scanning with the RS5100 Ring Scanner
- Scanning with the RS6000 Bluetooth Ring Scanner
- Scanning with the DS2278 Digital Scanner
- Scanning with the DS3678 Bluetooth Scanner
- Scanning with the DS8178 Digital Scanner
- Scanning with the LI3678 Linear Imager
- DataWedge
- Supported Decoders
- Camera Supported Decoders
- SE4100 Internal Imager Supported Decoders
- SE4710 Internal Imager Supported Decoders
- SE4720 Internal Imager Supported Decoders
- RS507/RS507x Supported Decoders
- RS5100 Supported Decoders
- RS6000 Supported Decoders
- DS2278 Supported Decoders
- DS3678 Supported Decoders
- DS8178 Supported Decoders
- LI3678 Supported Decoders
- Wireless
- Accessories
- Application Deployment
- Maintenance and Troubleshooting
- Technical Specifications
Settings
3. Touch Touch panel mode.
4. Select:
• Glove and Finger (Screen Protector OFF) to use a finger or a gloved finger on the screen without a
screen protector.
• Stylus and Finger (Screen Protector OFF) to use a finger or a stylus on the screen without a screen
protector.
• Finger Only to use a finger on the screen.
• Stylus, Glove and Finger to use a stylus, gloved finger, or a finger on the screen.
5. Touch Home.
Setting the Date and Time
The date and time are automatically synchronized using a NITZ server when the device is connected to a
cellular/wireless network. You are only required to set the time zone or set the date and time if the wireless
LAN does not support Network Time Protocol (NTP) or when not connected to a cellular/wireless network.
1. Go to Settings.
2. Touch System > Date & time.
3. Touch Use network-provided time to disable automatic date and time synchronization.
4. Touch Use network-provided time zone to disable automatic time zone synchronization.
5. Touch Date to select the date in the calendar.
6. Touch OK.
7. Touch Time.
a) Touch the green circle, drag to the current hour, and then release.
b) Touch the green circle, drag to the current minute, and then release.
c) Touch AM or PM.
8. Touch Time zone to select the current time zone from the list.
9. Touch Update Interval to select an interval to synchronize the system time from the network.
10. In TIME FORMAT, choose either Use local default or Use 24-hourformat.
General Sound Setting
Press the volume buttons on the device to display on-screen volume controls.
Use the Sound settings to configure media and alarm volumes.
1. Go to Settings.
2. Touch Sound.
3. Touch an option to set sounds.
Sound Options
• Media volume - Controls the music, games, and media volume.
41