User manual
Table Of Contents
- Contents
- About this Guide
- Getting Started
- Using the Device
- Settings
- Applications
- Data Capture
- Imaging
- Scanning Considerations
- Scanning with an Internal Scanner
- Scanning with the Camera
- Scanning with the RS507/RS507X Hands-Free Imager
- Scanning with the RS5100 Ring Scanner
- Scanning with the RS6000 Bluetooth Ring Scanner
- Scanning with the DS2278 Digital Scanner
- Scanning with the DS3678 Bluetooth Scanner
- Scanning with the DS8178 Digital Scanner
- Scanning with the LI3678 Linear Imager
- DataWedge
- Supported Decoders
- Camera Supported Decoders
- SE4100 Internal Imager Supported Decoders
- SE4710 Internal Imager Supported Decoders
- SE4720 Internal Imager Supported Decoders
- RS507/RS507x Supported Decoders
- RS5100 Supported Decoders
- RS6000 Supported Decoders
- DS2278 Supported Decoders
- DS3678 Supported Decoders
- DS8178 Supported Decoders
- LI3678 Supported Decoders
- Wireless
- Accessories
- Application Deployment
- Maintenance and Troubleshooting
- Technical Specifications
Getting Started
3. To remove the device from thecradle, rotate the device forward slightly (1) and lift it out of the cradle (2).
Powering on the Device
Press and hold thePowerbutton until the menu appears.
Turning off the Display
To turn off the display press and release thePowerbutton.
Turning off the Device
This section provides information on how to turn off the tablet.
NOTE: After the device is powered off and external power is applied to the device, the device
will automatically power on. This includes powered cradles, Expansion Back with Power Pack,
Rugged Charge Connector, and power supply/USB-C cable.
1. Press and hold the Power button until the menu appears.
2. Touch Power off.
25