User manual
Table Of Contents
- Contents
- About this Guide
- Getting Started
- Using the Device
- Settings
- Applications
- Data Capture
- Imaging
- Scanning Considerations
- Scanning with an Internal Scanner
- Scanning with the Camera
- Scanning with the RS507/RS507X Hands-Free Imager
- Scanning with the RS5100 Ring Scanner
- Scanning with the RS6000 Bluetooth Ring Scanner
- Scanning with the DS2278 Digital Scanner
- Scanning with the DS3678 Bluetooth Scanner
- Scanning with the DS8178 Digital Scanner
- Scanning with the LI3678 Linear Imager
- DataWedge
- Supported Decoders
- Camera Supported Decoders
- SE4100 Internal Imager Supported Decoders
- SE4710 Internal Imager Supported Decoders
- SE4720 Internal Imager Supported Decoders
- RS507/RS507x Supported Decoders
- RS5100 Supported Decoders
- RS6000 Supported Decoders
- DS2278 Supported Decoders
- DS3678 Supported Decoders
- DS8178 Supported Decoders
- LI3678 Supported Decoders
- Wireless
- Accessories
- Application Deployment
- Maintenance and Troubleshooting
- Technical Specifications
Getting Started
Number Item Description
11 PTT button Typically used forPush-to-Talkcommunications. Where regulatory
restrictions exist, button is configurable for use with other
applications.
12 Volume up button Increases audio volume.
13 Volume down button Decreases audio volume.
Table 3Device Rear View(Continued)
Setting Up the Device
Set up the device before using it for the first time.
1. Install the nano SIM Card. (ET45 only)
2. Charge the device.
3. Power on the device.
Installing the nano SIM Card
A nano-SIM card slot is available only on ET45 devices.The following steps only apply when installing or
replacing a nano SIM card.
1. Ensure the tablet is powered off.
CAUTION: Do not attempt to remove the battery while the tablet is powered on.
a) Press and hold the Power button until the menu appears.
b) Touch Power off.
2. Lift the corner of the battery cover up (1) from the notched area and carefully remove the battery cover
from the device (2) as shown.
CAUTION: Do not use any tool for battery cover or battery removal. Puncturing the battery
or seal may cause a hazardous condition and a potential risk of injury.
18