User manual
Table Of Contents
- Contents
- About this Guide
- Getting Started
- Using the Device
- Settings
- Applications
- Data Capture
- Imaging
- Scanning Considerations
- Scanning with an Internal Scanner
- Scanning with the Camera
- Scanning with the RS507/RS507X Hands-Free Imager
- Scanning with the RS5100 Ring Scanner
- Scanning with the RS6000 Bluetooth Ring Scanner
- Scanning with the DS2278 Digital Scanner
- Scanning with the DS3678 Bluetooth Scanner
- Scanning with the DS8178 Digital Scanner
- Scanning with the LI3678 Linear Imager
- DataWedge
- Supported Decoders
- Camera Supported Decoders
- SE4100 Internal Imager Supported Decoders
- SE4710 Internal Imager Supported Decoders
- SE4720 Internal Imager Supported Decoders
- RS507/RS507x Supported Decoders
- RS5100 Supported Decoders
- RS6000 Supported Decoders
- DS2278 Supported Decoders
- DS3678 Supported Decoders
- DS8178 Supported Decoders
- LI3678 Supported Decoders
- Wireless
- Accessories
- Application Deployment
- Maintenance and Troubleshooting
- Technical Specifications
Getting Started
Number Item Description
13 Left speaker Provides audio output.
14 USB port cover Use to seal the USB port. Available on healthcare devices only.
Table 2Device Front View(Continued)
Figure 2Rear View
Number Item Description
1 Cradle latching slot Used by cradles to secure the tablet.
2 Battery cover Provides access to the replaceable battery.
3 NFC antenna
position
Use to read NFC cards.
4 Rear Microphone Use for audio recordings.
5 Rear camera Autofocus camera that takes photos.
6 Rear camera LED
flash
Provides illumination for the camera.
7 Battery cover notch Lift the notched section of the battery cover to remove the battery
cover from the tablet.
8 Top scan button Initiates barcode data capture when a scan-enabled application is
active (programmable).
9 Top Microphone Use for voice communications or audio recordings.
10 Programmable
button
Button that is configurable for use with applications.
Table 3Device Rear View
17