User manual
Table Of Contents
- Contents
- About this Guide
- Getting Started
- Using the Device
- Settings
- Applications
- Data Capture
- Imaging
- Scanning Considerations
- Scanning with an Internal Scanner
- Scanning with the Camera
- Scanning with the RS507/RS507X Hands-Free Imager
- Scanning with the RS5100 Ring Scanner
- Scanning with the RS6000 Bluetooth Ring Scanner
- Scanning with the DS2278 Digital Scanner
- Scanning with the DS3678 Bluetooth Scanner
- Scanning with the DS8178 Digital Scanner
- Scanning with the LI3678 Linear Imager
- DataWedge
- Supported Decoders
- Camera Supported Decoders
- SE4100 Internal Imager Supported Decoders
- SE4710 Internal Imager Supported Decoders
- SE4720 Internal Imager Supported Decoders
- RS507/RS507x Supported Decoders
- RS5100 Supported Decoders
- RS6000 Supported Decoders
- DS2278 Supported Decoders
- DS3678 Supported Decoders
- DS8178 Supported Decoders
- LI3678 Supported Decoders
- Wireless
- Accessories
- Application Deployment
- Maintenance and Troubleshooting
- Technical Specifications
Application Deployment
18. Press Enter.
The Factory Reset package installs and then the System Recovery screen appears on the device.
19. Press Volume Up and Volume Down to navigate to Apply upgrade from ADB.
20. Press Power.
21. On the host computer command prompt window type:
adb sideload <file>
where: <file> = the path and filename of the zip file.
22. Press Enter.
The Factory Reset package installs and then the System Recovery screen appears on the device.
23. Press Power to reboot the device.
24. On the host computer, type:
adb disconnect.
Performing a Factory Reset Using a USB Drive
Perform a Factory Reset using a USB drive.
Go to the Zebra Support & Downloads web site at zebra.com/support and download the appropriate
Factory Reset file to a host computer.
1. Copy the Factory Reset zip file to the root of the USB drive.
• Copy the zip file to a USB drive using a host computer and then installing the USB drive into the
device.
• Connect the device with a USB drive already installed to the host computer and copy the zip file to
the USB drive. Disconnect the device from the host computer.
2. Press and hold Power until the menu appears.
3. Touch Restart.
The device resets.
4. Press and hold Volume Up until the Zebra boot screen.
The System Recovery screen appears.
5. Press Up and Down to navigate to the apply update from USB drive.
6. Press Power.
7. Press Up and Down to navigate to the Android Reset file.
8. Press Power.
The Factory Reset occurs and then the device returns to the Recovery screen.
9. Press Power.
151