User manual
Table Of Contents
- Contents
- About this Guide
- Getting Started
- Using the Device
- Settings
- Applications
- Data Capture
- Imaging
- Scanning Considerations
- Scanning with an Internal Scanner
- Scanning with the Camera
- Scanning with the RS507/RS507X Hands-Free Imager
- Scanning with the RS5100 Ring Scanner
- Scanning with the RS6000 Bluetooth Ring Scanner
- Scanning with the DS2278 Digital Scanner
- Scanning with the DS3678 Bluetooth Scanner
- Scanning with the DS8178 Digital Scanner
- Scanning with the LI3678 Linear Imager
- DataWedge
- Supported Decoders
- Camera Supported Decoders
- SE4100 Internal Imager Supported Decoders
- SE4710 Internal Imager Supported Decoders
- SE4720 Internal Imager Supported Decoders
- RS507/RS507x Supported Decoders
- RS5100 Supported Decoders
- RS6000 Supported Decoders
- DS2278 Supported Decoders
- DS3678 Supported Decoders
- DS8178 Supported Decoders
- LI3678 Supported Decoders
- Wireless
- Accessories
- Application Deployment
- Maintenance and Troubleshooting
- Technical Specifications
Application Deployment
Performing an Enterprise Reset Using USB Drive
Perform an Enterprise Reset using a USB drive.
Go to the Zebra Support & Downloads web site at zebra.com/support and download the appropriate
Enterprise Reset file to a host computer.
1. Copy the Enterprise Reset zip file to the root of the USB drive.
• Copy the zip file to a USB drive using a host computer and then install the microSD card into the
device. See Getting Started for more information.
• Connect the device with a microSD card already installed to the host computer and copy zip file to
the microSD card. See USB Communication for more information. Disconnect the device from the
host computer.
2. Press and hold Power until the menu appears.
3. Touch Restart.
4. Press and hold Volume Up until the Zebra boot screen appears.
The Android Recovery screen appears.
5. Press Up and Down to navigate to the apply update from USB drive.
6. Press Power.
7. Press Up and Down to navigate to the Enterprise Reset file.
8. Press Power.
The Enterprise Reset occurs and then the device returns to the Recovery screen.
9. Press Power.
Android Factory Reset
A Factory Reset erases all data in the /data and /enterprise partitions in internal storage and clears all
device settings. A Factory Reset returns the device to the last installed operating system image. To
revert to a previous operating system version, re-install that operating system image.Zebra distributes
theFactory Reset packages on the Zebra Support & Downloads website.
Performing a Factory Reset Using ADB
Perform a Factory Reset using ADB.
Go to the Zebra Support & Downloads web site at zebra.com/support and download the appropriate
Factory Reset file to a host computer.
1. Connect the device to a host computer using a USB-C cable.
When transferring files or debugging, make sure there is only one USB connection to the device. For
example, if using a USB cable, do not dock the device or attach an expansion back.
2. Go to Settings.
3. Touch System > Advanced > Developer options .
4. Slide the USB debugging switch to the ON position.
148