User manual
Table Of Contents
- Contents
- About this Guide
- Getting Started
- Using the Device
- Settings
- Applications
- Data Capture
- Imaging
- Scanning Considerations
- Scanning with an Internal Scanner
- Scanning with the Camera
- Scanning with the RS507/RS507X Hands-Free Imager
- Scanning with the RS5100 Ring Scanner
- Scanning with the RS6000 Bluetooth Ring Scanner
- Scanning with the DS2278 Digital Scanner
- Scanning with the DS3678 Bluetooth Scanner
- Scanning with the DS8178 Digital Scanner
- Scanning with the LI3678 Linear Imager
- DataWedge
- Supported Decoders
- Camera Supported Decoders
- SE4100 Internal Imager Supported Decoders
- SE4710 Internal Imager Supported Decoders
- SE4720 Internal Imager Supported Decoders
- RS507/RS507x Supported Decoders
- RS5100 Supported Decoders
- RS6000 Supported Decoders
- DS2278 Supported Decoders
- DS3678 Supported Decoders
- DS8178 Supported Decoders
- LI3678 Supported Decoders
- Wireless
- Accessories
- Application Deployment
- Maintenance and Troubleshooting
- Technical Specifications
Application Deployment
21. Press Enter.
The System Update installs (progress appears as percentage in the Command Prompt window) and
then the System Recovery screen appears on the device.
22. Navigate to Reboot system now and press the Power button to reboot the device.
23. On the host computer, type:
adb disconnect.
Performing a System Update Using USB Drive
Update the operating system on the device using a USB drive.
Go to the Zebra Support & Downloads web site at zebra.com/support and download the appropriate
System Update package to a host computer.
WARNING: Do not remove the USB drive during system update. Damage to device can occur.
IMPORTANT: USB drive must have FAT32 format.
1. Install the USB drive into the host computer USB port.
2. Copy the System Update zip file to the root of a USB drive.
3. Properly eject the USB drive from host computer and remove the USB drive.
4. Insert the USB drive into the USB port.
5. Press and hold Power until the menu appears.
6. Touch Restart.
7. Press and hold Volume Up until the Zebra logo screen appears.
The System Recovery screen appears.
8. Press Volume Up and Volume Down to navigate to apply upgrade from USB drive.
9. Press Power.
10. Use Volume Up and Volume Down to navigate to the System Update zip file.
11. Press Power.
The System Update installs and then the device returns to the Recovery screen.
12. Press Power to reboot the device.
Verifying System Update Installation
Verify that the system update was successful.
1. Go to Settings.
2. Touch About phone.
3. Scroll down to Build number.
4. Ensure that the build number matches the new system update package file number.
144