User manual

Table Of Contents

Application Deployment

8. Type adb devices.

The following displays:

List of devices attached XXXXXXXXXXXXXXX device

Where XXXXXXXXXXXXXXX is the device number.

NOTE: If device number does not appear, ensure that ADB drivers are installed properly.

9. Type:

adb reboot recovery

10. Press Enter.

The System Update installs (progress appears as percentage in the Command Prompt window) and

then the System Recovery screen appears on the device.

11. Press Volume Up and Volume Down to navigate to Apply upgrade from ADB.

12. Press Enter.

The System Recovery screen appears on the device.

13. Press Power.

14. On the host computer command prompt window type:

adb sideload <file>

where: <file> = the path and filename of the zip file.

15. Press Enter.

The System Update installs (progress appears as percentage in the Command Prompt window) and

then the System Recovery screen appears on the device.

16. Press Power to reboot the device.

Performing a System Update Using Wireless ADB

Use wireless ADB to perform a system update.

Go to the Zebra Support & Downloads web site at zebra.com/support and download the appropriate

System Update package to a host computer.

IMPORTANT: Ensure the latest adb files are installed on the host computer.

IMPORTANT: The device and the host computer must be on the same wireless network.