User manual
Table Of Contents
- Contents
- About this Guide
- Getting Started
- Using the Device
- Settings
- Applications
- Data Capture
- Imaging
- Scanning Considerations
- Scanning with an Internal Scanner
- Scanning with the Camera
- Scanning with the RS507/RS507X Hands-Free Imager
- Scanning with the RS5100 Ring Scanner
- Scanning with the RS6000 Bluetooth Ring Scanner
- Scanning with the DS2278 Digital Scanner
- Scanning with the DS3678 Bluetooth Scanner
- Scanning with the DS8178 Digital Scanner
- Scanning with the LI3678 Linear Imager
- DataWedge
- Supported Decoders
- Camera Supported Decoders
- SE4100 Internal Imager Supported Decoders
- SE4710 Internal Imager Supported Decoders
- SE4720 Internal Imager Supported Decoders
- RS507/RS507x Supported Decoders
- RS5100 Supported Decoders
- RS6000 Supported Decoders
- DS2278 Supported Decoders
- DS3678 Supported Decoders
- DS8178 Supported Decoders
- LI3678 Supported Decoders
- Wireless
- Accessories
- Application Deployment
- Maintenance and Troubleshooting
- Technical Specifications
Application Deployment
9. Touch the application file.
10. Touch Continue to install the app or Cancel to stop the installation.
11. To confirm installation and accept what the application affects, touch Install otherwise touch Cancel.
12. Touch Open to open the application or Done to exit the installation process.
The application appears in the App list.
13. Disconnect the USB drive from the host computer.
Uninstalling an Application
Free up device memory by removing unused apps.
1. Go to Settings.
2. Touch Apps & notifications.
3. Touch See all apps to view all apps in the list.
4. Scroll through the list to the app.
5. Touch the app.The App info screen appears.
6. Touch Uninstall.
7. Touch OK to confirm.
Android System Update
System Update packages can contain either partial or complete updates for the operating system. Zebra
distributes the System Update packages on the Zebra Support & Downloads website. Perform a system
update using either a microSD card or using ADB.
Performing a System Update Using ADB
Use ADB to perform a system update.
1. Connect the device to a host computer using a USB-C cable.
When transferring files or debugging, make sure there is only one USB connection to the device. For
example, if using a USB cable, do not dock the device or attach an expansion back.
2. Go to Settings.
3. Touch System > Advanced > Developer options .
4. Slide the USB debugging switch to the ON position.
5. If the device and host computer are connected for the first time, the Allow USB debugging? dialog
box with the Always allow from this computer check box displays. Select the check box, if required.
6. Touch OK.
7. On the host computer, navigate to the platform-tools folder and open a command prompt window.
141